60 plus mph with 21p vengance?

From the 192SS Bow Rider up to the 232SS & LS Bow Rider...this is the forum for all of you Inteceptor owners and enthusiasts.

Re: 60 plus mph with 21p vengance?

Postby HOT PURSUIT » Mon Sep 29, 2014 9:08 pm

Whoa all! 212 or 232? Or did I miss it??

HP
HOT PURSUIT
Member
 
Posts: 3500
Joined: Sat Apr 29, 2006 7:10 pm
Location: WISCONSIN
Location:
Occupation:
Interests: 0

Re: 60 plus mph with 21p vengance?

Postby iammarcuse » Tue Sep 30, 2014 8:13 pm

Ah, not sure. The original poster hasn't been around for a couple of months.
iammarcuse
Member
 
Posts: 167
Joined: Sun Jul 01, 2012 10:33 pm
Location: Canada
Location:
Occupation:
Interests: 0

Re: 60 plus mph with 21p vengance?

Postby chambers1517 » Tue Oct 21, 2014 12:46 pm

Sorry for the late reply. So with only me in the boat 55 mph is max or I hit the rev limit. With my family of 4 I can still hit 55 but very little throttle left. My boat is a 232 with a 350mpi. I really am not happy with the prop. When I pull tubes it seems to lose bite in turns. I thought about a 4 blade for tubing. I also thought about a mirage for better top speed. It seems my prop does neither one very well. Am I going to need two different props or is there one that is better overall than what I have?
chambers1517
Member
 
Posts: 48
Joined: Thu Aug 20, 2009 3:30 pm
Location:
Occupation:
Interests: 0

Re: 60 plus mph with 21p vengance?

Postby chambers1517 » Tue Oct 21, 2014 12:48 pm

Here is a picture of my boat.
Attachments
20140119_132404 - Copy.jpg
20140119_132404 - Copy.jpg (142.67 KiB) Viewed 1936 times
chambers1517
Member
 
Posts: 48
Joined: Thu Aug 20, 2009 3:30 pm
Location:
Occupation:
Interests: 0

Re: 60 plus mph with 21p vengance?

Postby iammarcuse » Tue Oct 21, 2014 2:28 pm

Nice rig! I would think if you have 1.5 gears you would be very happy with a 21 or 22 Enertia. It would be your best compromise. They have excellent bite and good top end. Otherwise you would need both a Rev4 for tubing and a Mirage or Tempest for speed (If your gears are 1.5 I would go Tempest and if they were 1.65 I would go Mirage) I have both a 22 Enertia and 23 Tempest for sale but it is a pain to ship across the border from Canada.
iammarcuse
Member
 
Posts: 167
Joined: Sun Jul 01, 2012 10:33 pm
Location: Canada
Location:
Occupation:
Interests: 0

Re: 60 plus mph with 21p vengance?

Postby HOT PURSUIT » Tue Oct 21, 2014 6:17 pm

Chambers is IT a 21P Vengeance you have???????? Good friend had a 232 with your engine but was a Sc (cuddy) and he ran a 21P ENERTIA that was the hot prop.

HP
HOT PURSUIT
Member
 
Posts: 3500
Joined: Sat Apr 29, 2006 7:10 pm
Location: WISCONSIN
Location:
Occupation:
Interests: 0

Re: 60 plus mph with 21p vengance?

Postby chambers1517 » Wed Oct 22, 2014 9:44 am

Yes HP it is a 21p.
chambers1517
Member
 
Posts: 48
Joined: Thu Aug 20, 2009 3:30 pm
Location:
Occupation:
Interests: 0

Re: 60 plus mph with 21p vengance?

Postby HOT PURSUIT » Wed Oct 22, 2014 3:32 pm

Then I'd say 21P ENERTIA, but be great to try B$ U BUY if somehow possible. The cupping in the ENERTIA will cost a 100 rpms or so which should bring you back down. And, forget about the blowing out on turns, this prop should take care of it

HP
HOT PURSUIT
Member
 
Posts: 3500
Joined: Sat Apr 29, 2006 7:10 pm
Location: WISCONSIN
Location:
Occupation:
Interests: 0

Re: 60 plus mph with 21p vengance?

Postby chambers1517 » Wed Oct 22, 2014 3:48 pm

Thanks for the responses, I will try and find a 21p enertia.
chambers1517
Member
 
Posts: 48
Joined: Thu Aug 20, 2009 3:30 pm
Location:
Occupation:
Interests: 0

Previous

Return to Interceptor Performance Boats

Who is online

Users browsing this forum: No registered users and 1 guest

cron